0-20mA/4-20mA Current Acquisition Module 6AI/4DI/4DO Communication-WP9038ADAM

Description

Title：
0-20mA/4-20mA Current Acquisition Module 6AI/4DI/4DO Communication-WP9038ADAM
Specification:
⚫Analog input channel: 6 single-ended
⚫Analog input type: DC 0-20mA/4-20mA
⚫Analog input accuracy: ±0.02mA
⚫Digital input channels: 4 channels (active low)
⚫Digital output channel: 4 channels (NPN transistor open collector output, 500mA)
⚫Operating temperature range: -20～70℃
⚫External power supply: DC 9V～30V/2W
⚫Isolation Protection: 1500VDC
⚫Installation method: standard DIN rail installation or screw installation
⚫imensions: 125×73×35mm
Interface Definition
AVcc: External power input positive terminal
AGnd: External power input negative terminal
AI_1+: Positive terminal of the first analog input
AI_2+: Positive terminal of the second analog input
AI_3+: No. 3 analog input positive terminal
AI_4+: No. 4 analog input positive terminal
AI_5+: No. 5 analog input positive terminal
AI_6+: No. 6 analog input positive terminal
Gnd: Signal ground, connected to the negative terminal of the analog input
Gnd: Signal ground, connected to the negative terminal of the analog input
DI_01: Channel 1 digital input
DI_02: Channel 2 digital input
DI_03: No. 3 digital input
DI_04: Channel 4 digital input
DO_01: Channel 1 digital output
DO_02: Channel 2 digital output
DO_03: No. 3 digital output
DO_04: Channel 4 digital output
485A: RS485 signal A+
485B: RS485 signal B-
Product Description:
⚫ 6 single-ended analog inputs (DC type 0-20mA/4-20mA)
⚫ 4-channel opto-isolated digital input and 4-channel opto-isolated digital output (NPN transistor open-collector output)
⚫ Using RS485 MODBUS RTU standard communication, it can be networked with configuration software, PLC, industrial touch screen, etc.
⚫ With communication and input and output status indicators
⚫ The communication circuit adopts lightning protection and anti-interference design
⚫ Can be widely used in signal acquisition and control of industrial field equipment
Communication indicator description:
⚫ After the module is powered on, the communication indicator turns green
⚫ During module communication, the communication indicator flashes
⚫ When the module receives the correct command, the communication indicator turns green
⚫ When the module receives an error command or a command other than the address of the module, the communication indicator light turns red
Package:
1*Current Acquisition Module