5.7L MerCruiser GOLD Marine Engine Package - (1967-Later)

Description

Store Home
Bookmark Us
Feedback
Contact Us
MENU
Store Categories
Store Support
Store Home
Bookmark Us
Feedback
Contact Us
Store Categories
Registered eBay
Vendor since 1999
24 Hour
Dispatch
Click Thumbnails to Enlarge
Product Description
5.7L MerCruiser GOLD Marine Engine Package - (1967-Later)
This
BRAND NEW
5.7L Vortec
GOLD
package is great for those that need a little more than just a base engine or long block, but still don't quite need a complete engine package.
This 5.7L GOLD package is
rated at 315 hp @ 5000 RPM
at the crank and
will fit, bolt in, and work in nearly all 5.0L & 5.7L marine applications from 1986-Current with no modifications.
(Pre-1986 applications will need to update the flywheel and in certain applications, the engine coupler)
. If you have an existing MerCruiser, Alpha One, Volvo Penta, OMC, or any other outdrive or inboard transmission, NO modifications or gear ratio changes are required when installing this 5.7L Vortec engine package. 12-3/4" or 14" flywheel available. This 5.7L Gold Package comes with the following components:
5.7L Vortec Marine
Engine
-
Cast iron block, teflon coated pistons, high flow
Vortec
cylinder heads with sintered powered-metal exhaust valve seat inserts, high performance GM marine roller cam shaft with roller valve lifters. These are just a few of the features that add up to more horsepower, greater low end torque, excellent durability, and longevity. All marine engine manufacturers (MerCruiser, Volvo Penta, Marine Power, Indmar, PCM, etc)
use this exact 5.7L Vortec engine because of its excellent performance and proven durability. 100% of your wakeboard and ski boats such as Ski Nautique, Malibu, Mastercraft, Tige, Supra, Moomba, etc use this exact 5.7L Vortec engine.
Exhaust Manifolds and Risers -
Included in the GOLD package is your choice of MerCruiser, Volvo Penta, OMC, Indmar, etc., exhaust manifolds, risers, gaskets and bolts.
Cast-Iron or Aluminum* Hi-Rise Intake
Manifold -
Michigan Motorz uses this 4 barrel intake manifold for its lightweight durable design and 15hp increase over standard intake manifolds. This manifold is made for fresh water AND the harshest salt water environments. We also include a thermostat housing and thermostat kit with this GOLD package
.
(*Additional
0.00
for the aluminum intake manifold option).
Edelbrock 1409 marine carburetor
-
Designed and calibrated for optimum marine performance in small-block V8 engines with a variety of manifolds that include Edelbrock Performer, Performer RPM, RPM Air-Gap, Torker II and other brands of similar design.
Electric Fuel Pump & Water/Fuel Seperator Kit-
a low pressure 4-7 PSI electric fuel pump
(U.S. Coast Guard
Approved
)
, delivers the right amount of fuel to the carburetor. Also includes fuel pump bracket, misc wires, and oil pressure switch. Loss of oil pressure will automatically shut off the fuel pump thereby preventing gas vapors from accidental ignition and preventing possible damage to the engine.
Delco Voyager Ignition Kit -
Voyager distributor with
Electronic Spark Timing
(EST), High energy ignition coil, 8mm marine spark plug wires and spark plugs, shift interrupt wire, timing tool, and other misc wires to easily connect to included marine engine wire harness.
(U.S. Coast Guard Approved)
.
Engine Wire Harness -
We install a brand new engine wire harness and hook up the included components such as the distributor and coil, electric fuel pump, carburetor, engine temperature switch and oil pressure switch. This is a common round 10 pin plug used in 99% of marine applications and hooks up to your existing gauges.
Also Included -
14" I/O or inboard flywheel, bi-directional circulation pump, harmonic balancer, 5-quart marine oil pan (5.5 quarts of oil required with oil filter), side mounted dip stick and tube, EZ oil drain kit, lifting eyes,
one-year manufacturer's warranty
, and complete installation guide and operation manual.
INBOARD ENGINE OPTION - ADD 0
- Inboard 14" flywheel
- Inboard dipstick & tube assembly
-
Wedge plate with square bore flange, allows carburetor to sit level on tilted engine installations.
OPTIONAL engine cover available for 0.00 additional.
Specialized exhaust manifolds may incur an additional charge.
This "5.7L Gold Package" is ran, timed and tested before shipment to customer.
SPECIFICATIONS
Manufacturer
GM
Part Number
5700-IGOLD315-Merc
Family-owned and operated,
Michigan Motorz
is your "One-Stop Online Shop" for Marine engines and parts, with our fully-stocked 33,000 sq ft showroom and knowledgeable sales associates ready to help.
Questions about this item?
Click here to contact us!
Payment Info
Purchase to be paid by PayPal, Mastercard, Visa, or Cash-in-Person.
Balance must be paid within 3 days of purchase unless prior arrangements are made. Local pick-up OK!
Items will be dispatched with in 24 Hours of the order (except weekends and holidays).
Email us
with any and all questions BEFORE the end of auction.
Shipping Info
About Us
Other Items You May Like
Store Home
Bookmark Us
Feedback
Contact Us
Copyright ©
Michigan Motorz
. All rights reserved.
eBay Template Design
NinjaTemplates
Powered by Solid Commerce
The
All-in-One Listing, Inventory & Order Management Solution
for Online Merchants