Quarch QTL1999 HD Programmable Power Module

Description

Quarch QTL1999 HD Programmable Power Module  +  Triggering  +  IEC Cable, USB Cable, Output Cable + Injection Power Cable
PRODUCT DETAILS
Replace your bench power supplies, scope and current probes with this powerful and cost-effective alternative: A fully programmable power supply and measurement tool with 12V, and 5V or 3V3 outputs.
HD modules take all the benefits of the
XLC module
plus multiple improvements including a high-density option, performing full power margining from 0V to nominal +20%, with complex voltage ramps, glitches and more.
The HD module can perform accurate current measurement at the same 100uA level as the XLC, has eight times the memory buffer and faster streaming modes.
250KHz sampling allows capture of accurate voltage, current and power data.
The modules also support advanced fixtures and LAN control.
FEATURES
This HD Power Module is a flexible power margining and measurement tool and a significant upgrade on the XLC module. This version has 12V and 5V (switchable to 3V3) outputs and is ideal for SAS, SATA and PCIe based devices. The outputs can be set automatically when used with advanced Quarch fixtures.
Each rail can be programmed from 0 to 120% of its nominal voltage. The voltage and current of each output can be simultaneously recorded to provide accurate power consumption measurement.
The module allows programming of arbitrary voltage output waveforms which can be used to simulate power-up ramps, power failures, noisy power sources and much more. Patterns can be created over a range of microseconds to minutes, allowing a wide range of testing options.
A high-speed record feature provides an oscilloscope-like function to record the output voltage, current and power consumption of the attached device.
A range of injection fixtures allow the module to inject power into a variety of devices.
Dual output
Programmable output waveforms
Flexible power margining
High-speed measurement and recording
Easy measurement of voltage, current and power
Simultaneous sampling of voltage and current on both outputs
Accurate power consumption measurement
External triggering option available
Simple test automation from any standard scripting language
Supports advanced power injection fixtures.
TECHNICAL
0?6V and 0?14.4V outputs
3A continuous output current at nominal voltage
1uS pattern step resolution
0.6V/uS output slew rate (no load)
250kSps measurement sampling rate
± (2 mA + 1%) @ 1?3000mA accuracy
± (2 uA + 2%) @ 100uA?1mA accuracy
USB and LAN control options
64Mbit memory depth
2x SMA triggering connectors.
TRIGGERING SPECIFICATION
2x triggering connectors
3.3 volt trigger
Start/stop pattern on external trigger
Start/stop measurement on external trigger
Trigger out on power/current threshold
Trigger out on pattern start
Trigger out on measurement start.